Description SHOTGUN BARREL SWEEP is primarily designed to focus its cleaning on lead, powder, and plastic wad residue in shotgun barrels. SHOTGUN BARREL SWEEP is also designed to aid in the cleaning of forcing cones, semi-auto gun ports and chokes. This product takes shotgun cleaning to the next level with the focused removal of unwanted elements to keep you shooting for longer without having to worry about excessive fouling that might hamper equipment. SHOTGUN BARREL SWEEP was designed with the ultimate shotgun marksman in mind – why spend time at the cleaning bench when you can spend it on the range? “BRING FORTH THE MARKSMAN in you” Directions: Secure and unload the firearm. Wet 3 patches with SHOTGUN BARREL SWEEP and push through the barrel. Run patches slowly to give solvent time to react with the bore surface. Run 10 passes through using a brush soaked in SHOTGUN BARREL SWEEP. Wet another 4 patches with SHOTGUN BARREL SWEEP, run through, then leave the product in the barrel for 3-5 minutes. Extend the time for extreme fouling. Continue running the patches lubricated with SHOTGUN BARREL SWEEP through until the patches gather no residue at the barrel tip. Finish with 2 dry patches. Before storing your firearm, push a patch dampened with VELDT GUN OIL through the barrel as this will prevent rust and dust from settling on your firearm. Always run a clean, dry patch through the firearm before use to prevent any obstructions. This product is also compatible with bore snakes. Specifications: SHOTGUN Barrel Sweep has a chemical composition ideal for aiding the removal of plastic residue. This product delivered excellent results when cleaning semi-auto gas ports. Not for human or animal consumption. Always test the product on barrels and coatings before application. Keep out of reach of children. Store in a cool, dry place away from direct sunlight Acetone Free Ammonia Free Biodegradable